Ideal rigs

SPECIFICATIONS & INVENTORY

As of March 2017
The Group has six Ideal rigs, four from 2014 and two from 2011.

Highlights:

  • Manufacturer - National Oilwell Varco (NOV) Ideal
  • AC programmable
  • Pad optimized walking system
  • Bi-fuel capable
  • Efficient mobilization capabilities
  • 1800-hp Drawworks
  • 3 7500 psi Mud pumps
Additional Information:
Mast: (Two Section)
  • Height – 142 FT
  • Hook Load – 750,000 #
  • Base Dimension – 12 FT X 12 FT
  • Racking Cap – 5” DP w/ 6/8 TJ = 208 Stands and 8 Stands of 8” drill collars
Substructure: (Slingshot)
  • Rotary Load – 750,000 # with Full Setback
  • Setback Load – 500,000 #
  • Drill Floor Height – 25 FT
  • Floor Dimension – 32 FT X 32 FT
  • Mast and Sub are built to API 4F, 3rd Edition
Hoisting Equipment:
  • Drawworks: ADS-10SD – AC Powered motors (2), single speed gearbox, wireline drum and plate disc brakes
  • Wireline size – 1-3/8”
  • Travelling Block – Max Hook Load 506T (4500KN), Six (60” diameter) Sheves
  • 75 Kip Deadline Anchor (LH), Lug Floor Mount, Rotating (API 8C, PSL-1)
Rotary Table:
  • 37-1/2” Independent Rotary Drive
  • speed 200 rpm
  • Gear ratio 3.56
  • Static Load Rating = 1,300,000 #
  • Max Working Torque = 23,900 FT-#
  • Master Bushing Bowl
  • Insert Bowls; 1, 2 and 3. Built to API 7K
(Continues below the picture)
         
Top Drive System:
  • TDS-11SA 500 Ton Rated w/ 7500 psi Mud Path, 55, 000 Torque, FT-# intermittent
  • 37,500 Torque, FT-# Continuous
  • With PH-75 Pipe Handler
  • API 500T Swivel Bail, nominal length 120”
Iron Roughneck:
  • ST-80CL – Max Make-up Torque 60,000 FT-#, Max Break-out Torque.
Tubular Handling Equipment:
  • Automated Catwalk
  • V-Door Ramp (Standard 25ft)
  • Sets of: Elevators, Slips, Manual Tongs, Safety Clamp
Electrical Power Generation and Distribution:
  • AC Ideal Rig Power Package:
  • This Power System is designed to operate with the following Equipment:
    • 3 – CAT 3512C Engines driving a 600 VAC, 60HZ, 1750kVa Baylor Generator
    • 1 – 1800 HP Drawworks driven by two AC Motors
    • 1 – 800 HP TDS-11SA Top Drive driven by two AC Motors
    • 1 – 400HP Rotary Table driven by one AC Motor
    • 3 – 1600 HP Mud Pumps driven by two AC Motors.
    • Electrical Cabling Handling System
Well Control Equipment:
  • Shaffer 13-5/8” 5,000 psi Spherical BOP
  • T3 13-5/8” 10M Double LXT BOP Assembly
  • T3 13-5/8” 10M Single LXT BOP Assembly
  • Ram Assemblies
  • Test Stump
  • NOV BOP Controls Unit
  • BOP Transport
  • 4 1/16” 10,000 psi Choke Manifold with Choke and Kill Line
  • Remote Choke Panel
Drillers Cabin/Amphion Controls:
  • Amphion Integrated System for managing, controlling and monitoring rig floor equipment
  • Wrap Around Operator Chair
  • Touchscreens (4)
  • Amphion Tool Controllers
  • Multi-Tool Control Cabinet
Walking System:
  • Hydraulic Walking System
  • 150’ Capacity with Festoon
(Continues below the picture)
 
Hydraulic Power Supply & Control System:
  • 900 Gallon SS Reservoir
  • Diesel Tank 60 Gallon
Mud Pumps:
  • 3 - FD-1600 Triplex Mud Pumps 7,500psi System, Rear Mounted belt drive with two Baylor AC Motors on each pump
High Pressure Components:
  • Rotary Kelly Hose – 4” OD x 3-1/2” ID x 75’ long API Grade D, 7,500 psi working pressure and 10,000 psi test pressure
  • Dual Standpipe
  • Vibrator Hose
  • Jumper Hose
Mud System & Mud Return:
  • 2/3 – King Cobra Venom Linear Motion Shaker
  • 1 – Degasser Model DG-10 Vertical, 60” diameter mounted on an Oilfield Skid
  • 1 - Desander Vertical Model DSN-3V-10CTX
  • 1 – Desilter Model DSLR-20GG-4CTX
  • Desander Pump
  • Desilter Pump
  • Agitators Model MA-10 RG-C
  • Shaker Tank – 55’ Long X 12’ Wide
  • 2 – Charge Pumps
  • 2 – Mixing Pumps
Mud System & Mud Return:
  • 1 – Mud Hopper
  • 1 – Caustic Barrel
  • 1 – Mud Check Station with sink
  • Trip Tank – 100 BBL
  • Trip Tank & Water transfer Pumps
  • Poor Boy Degasser
Well Measurement, Surveying & Logging:
  • Drum Assembly
  • Brake Assembly
  • Drive Assembly
  • Power Drive Assembly
  • Hydraulic Assembly
  • Spooning/Measuring Assembly
  • Skid mounted
Air Compressor Package
Water & Fuel Supply Package:
  • 400 BBL Fuel Tank
  • Fuel Filter System
  • Water Tank – 400 BBL
Workshop/ Change House:
  • Skid – 10’ x 38’ x 9’- 8-3/8” high
Tubulars:
  • Up to 20,000FT 5” drill pipe